2. How can i set "auto trading" or "auto close" ?
Automated Forex trading is possible with help of Forex systems advisors). They can be free or paid. Personally I prefer paid Forex systems. As example you can see couple of profitable Forex systems on Forexeasystems.

3. How much i can earn from Forex ?
It depends from your skills, trading strategy and money management. In numbers…0-20% monthly as usual

4. How much i should invest on Forex ?
only your choice. But IMO your capital be less than 100-200$

Hope, it will help you to make right decision.
First of all, I advise you to trade on demo. But if you want

firstly generally,

Market order means to buy / sell at current price

buy limit order means to buy at the limit price or lower.

sell limit order means to sell at the limit price or higher.

Are you using MT4?

Anyway since you are doing DEMO, why you experiment?

If it is a market order, you will see your order appear in the at the current price.

Pending orders will requrie you to specify a entry price and if you place it, it will appear at the price you specified.

If you are new to forex, you can visit my blog where i write for newbies.

Hope i helped!

Technically, for similarity such as you can apply candlestick analysis in forex trading.

Fundamentally, government decision and economical news may give impact to the forex market, just same as stock market.

But of course, differences as well. The most notable different is you can trade forex 24 hours a day. You can read the following for more detail on the differences:
http://www.forex2u.com/Forex-VS-Stock.html

one unique feature of this site is whether you are a beginner or an experienced trader, they will provide an Account Service manager to be your personal consultant who will serve as your mentor and trading will answer all your technical questions and with whom you can talk live over the phone, email, chat or any form of communication available. and they can even set your Take Profit and Stop Loss rates so that you are assured to earn unlimited gains but not lose more than your authorized amount.

Register for a and download a Free Forex Ebook.

Market order means to buy / sell at current price

buy limit order means to buy at the limit price or lower.

sell limit order means to sell at the limit price or higher.

If you are new to forex, you can visit my blog where i write for newbies.

Hope i helped!

what should i do to make my site be spread to many audiences to earing?

Thanks!]]>

I used this as the basis of a system to trade stocks. It worked, but only if you use it long and I abandoned it because the equity curve was not very smooth. Adding filters on market conditions helps, i.e. you take trades only when the market trends.

Best Answer Please!

Everyone from San Diego flew over on the same flight. All of the guests ended up in a cool little condo complex right on the beach in Kaanapali. The wedding couple stayed in a very nice resort-style hotel in Kihei. They had the wedding under a gazebo overlooking the ocean at their hotel. The reception was then held on a big lanai they had for such occasions.

We ended up staying there for about a week. It was really fun and I think about 30 people ended up going.

Don't worry about offending someone who can't or doesn't want to go. It's your wedding. It's up to the guests to decide whether they want to take a trip to Hawaii for a few days. And, they would really appreciate if you put some kind of package deal together for them. We did.

an alien company that sells stuff through out the galaxies has discovered earth and wants to establish business with earth. you were there to see a demonstration of their new teleporter that would allow someone to go across the universe in minutes. you first went to a room where you see a demonstration were the test subject "Skippy" was teleported from the right side of the robot doing the demo (your left) to the tube on the left of him. he got burned during the process and then you are led to the official test room. each seat had a restraining system/scanner. once the room was full, it would lower into place over your shoulders. the the screen would come up and they would start to scan the audience for a test subject to teleport to their home world. the president of the company comes in and decides that he would rather visit all the earthlings instead of just having one visit him. in his hury to get the demostration going he tells one of his workers to just send him and his signal gets lost. while trying to get the signal back and send him to earth they accidentaly send back a carnivours creature… and then you know the rest.

If you invite everyone to Hawaii, you'll probably get some people you didn't count on. So, will they come to the reception in California, too? It gets confusing. Don't put the pressure on them to choose one or both!

The invitation to the reception in California should just say, "Celebrate the marriage of…" see link for various ideas. No one will be offended.

If you invite everyone to Hawaii, you'll probably get some people you didn't count on. So, will they come to the reception in California, too? It gets confusing. Don't put the pressure on them to choose one or both!

The invitation to the reception in California should just say, "Celebrate the marriage of…" see link for various ideas. No one will be offended.

Look it up on and you can see videos of it. I always do that when I start thinking of my favorite retired rides. I so miss 20,000 leagues under the sea!

Your old analog low-definition boob-tube TV is capable of 640×480 resolution ONLY. That is as high as a composite TV signal will go. No further.

That is why old boob-tube TVs are totally unsuitable for use with computers. High-definition flat-panel HDTVs work much better– The better ones can do up to 1920×1080 resolution.

He prayed that grace in ev'ry heart might dwell;
He longed to see America excel;

I have a PhD in English (minus the dissertation) and this one stumps me. What I said is a guess.

SteveC

What does this have to do with a DTV remote?

SteveC

Look it up on and you can see videos of it. I always do that when I start thinking of my favorite retired rides. I so miss 20,000 leagues under the sea!

He prayed that grace in ev'ry heart might dwell;
He longed to see America excel;

I have a PhD in English (minus the dissertation) and this one stumps me. What I said is a guess.

SteveC

an alien company that sells stuff through out the galaxies has discovered earth and wants to establish business with earth. you were there to see a demonstration of their new teleporter that would allow someone to go across the universe in minutes. you first went to a room where you see a demonstration were the test subject "Skippy" was teleported from the right side of the robot doing the demo (your left) to the tube on the left of him. he got burned during the process and then you are led to the official test room. each seat had a restraining system/scanner. once the room was full, it would lower into place over your shoulders. the the screen would come up and they would start to scan the audience for a test subject to teleport to their home world. the president of the company comes in and decides that he would rather visit all the earthlings instead of just having one visit him. in his hury to get the demostration going he tells one of his workers to just send him and his signal gets lost. while trying to get the signal back and send him to earth they accidentaly send back a carnivours creature… and then you know the rest.

If the laptop has a peripheral display output, it has a graphics processor to support it. I have not yet heard of laptops having extra sockets for good looks.
Rule #1 – Check condition of the cable and terminating pins.
Cables are the most common cause of hardware connection faults, and should be the first thing to check in the process of elimination. They also can't be too long, 5 meters is acceptable, 10+ meters will start to develop signal degradation, attenuation, cross talk and impedance, resulting in block noise, or no picture at all, not recommended for standard cables.
Try another cable if you can, and if the same results are achieved with a new or other cable, . . . then it's probably not the cable.
Rule #2 – Check the condition of the TV if it displays HDMI output from another source. If HDMI displays correctly from another device, then it's simply the laptop sending the wrong, or no signal through the port. I guess this laptop has never been connected to a display via the HDMI port yet.
Rule #3, 4, 5, 6, etc….
If it's an older laptop that's had a Win 7 upgrade, good chance the hardware might be outdated for the OS and won't offer all the display features that the old OS did. A BIOS upgrade may be in order.
I don't have a Win$ 7 handy so the rest is based on what I know of XP and Vista.
Power on TV and computer, connect cables, "Not supported Format" is the right port and channel.

In Control Panel > System > Device manager > Display Adaptors there will be a reference to the primary and secondary graphics processors. Make sure all devices are working in their properties. The HDMI output may have to be enabled.

Right mouse on the desktop > Appearance and Personalisation > Adjust Resolution. There should be at least 2 monitor icons labeled 1 and 2, Default Monitor, and Plug and Play Monitor.
Highlight monitor 1 and next to Display select the plug and play monitor in the dropdown list. If it's not in the list press Detect.
Next to Multiple Display select Duplicate The Display.
Apply.
OR…… Click Advanced settings and select the tab referring to the graphics processor drivers. Click on Device Settings, under Modes select Clone. Make sure the peripheral HDMI display is set to primary number 1.
Apply.
If the TV now has a replica of the laptop display, that means everything works, and you can follow directions.
If still no picture on the TV, see if it works with DVI interface. There's socket adaptors for both way conversions. The image quality is the same as HDMI, so if that works, good. Leave it.
There's a few different DVI pin configurations, you'll need a DVI-I dual link adaptor plug or cable for this operation.
If still no good, there's RGB analog interface, not as crisp, but good to try anyway. Some laptops also have S-video port as another option.
Though when changing cables with different ports, you may have to return to display settings and modify the output type to RGB analog, digital, HDMI, DVI….

Jeez, lucky there's no character limit for these responses aye.
Let me know if none of this works so I'll know I wrote all this for nothing. Except for personal revision.
.